Routing Parameter Settings - Mitsubishi Electric Melsec Q Series User Manual

3 COMMUNICATIONS VIA OTHER NETWORKS

3.3.3 Routing parameter settings

Item name
Set the Network No. of the Ethernet or CC-Link IE Controller Network, CC-Link IE Field Network,
MELSECNET/H, MELSECNET/10 to which the communication request destination station or the
Target Network No.
communication request source station is connected when sending a communication request
message or a response message, respectively.
Set the Network No. of the Ethernet or other networks to which the next communication relay receive
Relay Network No. station or the next communication relay send station is connected when sending a communication
request message or a response message, respectively.
Set the station number of the target Ethernet module/network module that is used as relay to the
Relay Station No.
network set by the Relay station No..
3 - 15
The routing parameters contain information of the Ethernet modules passed through
when accessing other stations.
This section explains the routing parameters that must be set in order to access other
stations via the Ethernet module using the CC-Link IE Controller Network, CC-Link IE
Field Network, MELSECNET/H, MELSECNET/10 relay communication function.
Open the "Routing Information" screen under the network parameter screen of a
programming tool.
Routing information setting
Description of setting
MELSEC-Q/L
Setting range/option
1 to 239
1 to 239
Universal model QCPU,
LCPU: 0 to 120
A module other than a
Universal model QCPU and
an LCPU: 0 to 64
3 - 15