Mitsubishi Electric Melsec Q Series User Manual page 165

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 32
keyword-set (Q series Ethernet module dedicated command)
[Function]
[Designation format]
[Designation example 1]
[Designation example 2]
[Designation example 3]
[Caution]
POINT
The password designated using the quote keyword-set command is explained.
(1) If a password is registered in the target file for file transfer, use this command
to set the password in the Ethernet module after logging into the Ethernet
module prior to file transfer.
(2) The password is used so that the CPU module can allow/prohibit access to the
target file from outside.
(3) The password for file access to the CPU module is registered with a
programming tool.
The password designated with this command is for operations with the
Ethernet module.
The user designates the same character string as that registered with a
programming tool to the designated file of the CPU module.
Sets the registered password of the target file for file transfer
in the Ethernet module.
Or, display/clear the current password set in the Ethernet
module.
Use this command only if a password is registered in the
target file of file transfer.
The Ethernet module performs a password check when
the designated file is accessed.
quote keyword-set [password]
Password: To set a password, designate the password
registered in the file of the target memory of a
CPU module. Designate "
password set in the Ethernet module.
One of the following is displayed as the execution result for a
successful completion.
• When setting a password
• When displaying a password : 200 keyword is "password"
• When clearing a password
To set the password (1234) to the Ethernet module:
quote keyword-set 1234
To display the password currently set in the Ethernet module:
quote keyword-set
To clear the password currently set in the Ethernet module:
quote keyword-set
• If a password is registered in the target file for file transfer,
set the password in the Ethernet module prior to file
transfer.
Designating the password registered in the target file of a
CPU module enables file operation in the CPU module.
• One password can be set in the Ethernet module. If the
target file for file transfer changes and a password is
registered in the file which is at the changed destination,
reset the password for the new target file in the Ethernet
module.
• When logging into the Ethernet module from the external
device, the password set in the Ethernet module changes to
" " (clear)
• Set the password in the QnUDVCPU file with four
characters.
If a password with 5 or more characters is set, the file
operation with FTP cannot be performed.
MELSEC-Q/L
" to clear a
: 200 Command successful
: 200 Command successful
.
5 - 32