Ftp Parameter Settings For File Transfer From A Programming Tool - Mitsubishi Electric Melsec Q Series User Manual

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)

5.3 FTP Parameter Settings for File Transfer from a Programming Tool

Item name
FTP
Login Name
Current
Password
New
Command Input Monitoring
Timer
PLC Monitoring Timer
5 - 5
This section explains how to set the Ethernet FTP parameters for the file transfer
(FTP).
Open the "Setting the Ethernet FTP Parameter" screen in the network parameter
screen of a programming tool. For how to open the screen, refer to the operating
manual for the programming tool used.
FTP parameter settings
Description of setting
Select whether or not to use the FTP function.
Set the login name when a communication destination requests
(login) file transfer to the Ethernet module by external device.
Set the password when a communication destination requests
file transfer to the Ethernet module by external device.
Set the new password when a communication destination
requests file transfer to the Ethernet module by external device.
Set the monitoring time for the Ethernet module to monitor the
command input time from the FTP client.
Set the monitoring time for the Ethernet module to monitor the
operation of the local station's CPU.
(1) FTP (Address: 4
function
Set whether or not to use the FTP function of the Ethernet module.
Item
FTP
... b8, b9); Default value: Do not use the FTP
H
Explanation
Use the FTP function.
Do not use the FTP function.
MELSEC-Q/L
Setting range/Selections
• Not Used
• Use
Up to 12 characters
Initial login name:
QJ71E71 or LJ71E71
Up to 8 characters
Initial password:
QJ71E71 or LJ71E71
Up to 8 characters
1 to 32767
1 to 32767
5 - 5