Procedure And Required Processing On The External Device Side (Ftp Client) - Mitsubishi Electric Melsec Q Series User Manual

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)

5.4 Procedure and Required Processing on the External Device Side (FTP Client)

Procedure on the external device side (FTP client)
Log-in to the Ethernet module
NO
be used subject to the remote
Remote password unlock processing
NO
be used subject to the remote
Remote password lock processing
5 - 7
This section explains the procedure and required processing on the external device
side for using the FTP server function of the Ethernet module.
In the explanation, the FTP operation commands and input formats used for the
applicable operations are shown.
(<ret> indicates input using the CR, Enter, or Return key.)
FTP transfer operation procedure
Start
Is the connection to
password check?
YES
Data communication
Is the connection to
password check?
YES
End
(1) Checking the initial processing of the Ethernet module
Make sure that the Ethernet module's initial processing has normally completed
by checking the LED display/input signal of the Ethernet module.
• LED display: The [INIT.] LED on the front of the Ethernet module flashes.
• I/O signal: The initial normal completion signal (X19) turns on.
· · · · (1) Check the initial processing of the Ethernet module
· · · · (2) Log-in to the Ethernet module
· · · · (3) Remote password unlock processing
· · · · (4) Various operation of the FTP
· · · · (5) Remote password lock processing
· · · · (6) Disconnect a connection with the FTP server
MELSEC-Q/L
5 - 7