Mitsubishi Electric Melsec Q Series User Manual page 42

2 USING THE E-MAIL FUNCTION
Item name
Send Mail Address
News Specification
2 - 14
(3) Send mail address setting
[Purpose of setting]
Register the e-mail address of the external devices where e-mail is to be sent.
[Start procedure]
E-mail setting screen  Send Mail Address Setting
[Setting screen]
[Setting item]
Set the mail address of the transmission destination
Select whether or not to set news
(a) Send mail address
1) Designate the mail addresses of a maximum of 16 external devices to
which mails are sent from the local station's Ethernet module. (Only
one e-mail address can be specified for each area.)
2) In the send e-mail address setting, sequentially set up e-mail
addresses starting from No. 1.
To delete an e-mail address with a mid-setting number, specify dummy
e-mail addresses before that address. (If it is preceded by any empty
e-mail address areas, subsequent setting numbers and areas will
move forward to fill in any empty numbers and areas after each
setting, so the setting numbers will change.)
3) When sending (MSEND instruction) e-mail by the programmable
controller CPU, specify these setting numbers (1 through 16) in the
control data.
(b) News specification
Designate whether or not to send the news information set with the CPU
monitoring function.
Item
News Specification
For more details on the news settings, see Section 2.9.
Description of setting
Explanation
Execute News
No Execute
MELSEC-Q/L
Setting range/Selections
Up to 256 characters
• Execute News
• No Execute
2 - 14