Setting The Station No. <-> Ip Information - Mitsubishi Electric Melsec Q Series User Manual

3 COMMUNICATIONS VIA OTHER NETWORKS
3.3.1 Setting the Station No. <-> IP information
Item name
Station No. <-> IP
Select the Station No. <-> IP information system (conversion method).
Information System
• This setting is required when "IP Address Computation System" or "Use-Together System"
Net Mask Pattern is selected as the conversion method.
• Set the mask value used in the logical product with the local station's IP address.
Input Format Select the input format of "Net Mask Pattern" and "IP Address".
• This setting is required when "Table Computation System" or " Use-Together System" is
Network No. selected as the conversion method.
• Set the Network Nos. of the communication request destination/source stations.
• This setting is required when " Table Computation System" or " Use-Together System" is
Station No. selected as the conversion method.
• Set the station number of the communication request destination/source stations.
• This setting is required when " Table Computation System" or " Use-Together System" is
IP Address selected as the conversion method.
• Set the IP address of the communication request destination/source stations.
3 - 6
This section explains the Station No. <-> IP information settings that are required to
access other stations via the Ethernet module using the CC-Link IE Controller
Network, CC-Link IE Field Network, MELSECNET/H, MELSECNET/10 relay
communication function.
In the network parameter screen of a programming tool, start the "Station No. <-> IP
Information" screen.
Setting the Station No. <-> IP information
Description of setting
MELSEC-Q/L
Setting range/option
• Automatic Response System
• IP Address Computation System
• Table Exchange System
• Use-Together System
C0000000 to FFFFFFFF
H H
• DEC
• HEX
1 to 239 (set in decimal)
1 to 64 (set in decimal)
A value other than 00000000 and
H
FFFFFFFF
H
3 - 6