Mitsubishi Electric Melsec Q Series User Manual page 164

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 31
password-lock (Ethernet module dedicated commands)
[Function]
[Designation format]
[Designation example 1]
password-unlock (Ethernet module dedicated commands)
[Function]
[Designation format]
[Designation example 1]
[Caution]
Designates the remote password set in the CPU module as
unlocked and performs the lock processing.
This command is executed if the FTP communication port is
designated as a port subject to the remote password check.
quote password-lock
The following is displayed as the execution result for a
successful completion.
200 Command Okey
To designate the remote password (1234)
quote password-lock
Designate the remote password set in a CPU module and
perform the unlock processing.
This command is used when the FTP communication port is
designated as a port subject to the remote password check.
quote password-unlock [remote password]
Remote password: Designate the remote password set in the
parameter of a CPU module.
• The following is displayed as the execution result for a
successful completion.
200 Command Okey
• The following is displayed if the remote password does not
match.
556 Password Error
• The following is displayed if another command is requested
before the remote password unlock processing is performed.
555 Password Locked
To designate the remote password (1234)
quote password-unlock 1234
• If the FTP communication port is designated as a port subject
to the remote password check, the status will be "locked"
when the user logs into the Ethernet module from an external
device.
• Executing this command and performing the unlock
processing prior to various operation of the FTP enables file
operation in a CPU module.
• If the FTP communication port is not designated as a port
subject to the remote password check, the operation is
completed successfully when the remote password unlock
processing is performed.
MELSEC-Q/L
5 - 31