Table of Contents
Advertisement
10 USER FILES
10.2 User File List
(
)
: Indicates the file(data) stored in CPU memory.
Project name folder
Sub folders (fixed)
Sfc
(1)
Project file
Information file of correspondence between Motion SFC program No. (0 to 255) and SFC program names (SFC files)
Motion SFC chart file
(2)
Motion SFC chart edit information and comment information file of one Motion SFC program
(3)
Motion SFC list file
Text file after conversion of Motion SFC chart of one Motion SFC program into list
(4)
Motion SFC code file
File after conversion of list file of one Motion SFC program into internal codes (including comment information)
Glist
(5)
G list file
LIst file of transition programs (G0 to G4095)
Gcode
(6)
G code file
File after conversion of transition program(G0 to G4095) list file gn.bin(0 n 4095) into internal codes
Flist
F/FS list file
(7)
List file of operation control programs (F/FS0 to F/FS4095) list file
Fcode
(8)
F/FS code file
File after conversion of operation control program(F/FS0 to F/FS4095) list file fn.bin(0 n 4095) into internal codes
(
)
()
(9a) Motion SFC program conversion file(control code)
File where SFC code, G-code and F/FS code files are combined and converted into CPU's Motion SFC program
code memory storage format
(
)
Motion SFC program conversion file(text)
(9b)
File where G list and F/FS list files are combined and converted into CPU's Motion SFC program text memory storage format
(Note-2) : The above two files are always updated simultaneously.
(
)
(10) Motion SFC parameter file sfcprm.bin
(
)
(11) K code file
(12)
Automatic numbering
setting information file
(13) PC type file
(
)
System setting data file
(14)
High speed read setting file
Optinal data monitor
setting file
(
)
(15) Servo data file
(16)
Mechanical system
program editing file
(Note-1) : 32-axes only
(
)
Mechanical system
(17)
program conversion file
(
)
(18)
Cam data conversion
file
(Note-1) : 32-axes only
(19) Backup data file
(20) Motion register file
Device memory file
(21) Device setting screen
information file
(22)
Q series PLC
common parameter file
(23)
Optional data monitor
setting file
(24)
C om m unica tio n
settin g in form ation file
Program editing temporary directory
temp
A user file list is shown below.
Folder of user-set "project name"
Project name.prj
SFC program name.sfc
SFC program name.txt
SFC program name.cod
g0000.bin to g4095.bin
g0000.cod to g4095.cod
f0000.bin to f4095.bin
f0000.cod to f4095.cod
svprog.bin
autono.inf
gsvp.cnf
svsystemH.bin
svlatch.bin
svsysmon.bin
svdataH.bin
svparaH.bin
svls.bin
svedtda1.bin
(Note-1)
svedtda2.bin
(Note-1)
svedtda3.bin
(Note-1)
svedtda4.bin
svmchprm.bin
svcamprm.bin
(Note-1)
svcampr2.bin
(Note-1)
svcampr3.bin
(Note-1)
svcampr4.bin
svbackup9.bin
svbackup10.bin
modevice.bin
devmem.bin
devset.inf
param.wpa
svsysmon.bin
com m un i.inf
( 1pc.)
( 256 pcs.)
( 256 pcs.)
( 256 pcs.)
sfcprog.cod
sfcprog.bin
Motion SFC control parameter setting information files
Internal code files of servo program (K0 to K4095) (file size is fixed length)
Automatic numbering setting information files
CPU type information files
System setting data information files
High speed read setting information files
Optinal data monitor information files
Axis data (fixed, home position return, JOG operation) parameter block information files
Servo parameter information files
Limit switch setting data information files
Mechanical system program edit information files (page 1 to 8)
Mechanical system program edit information files (page 9 to 16)
Mechanical system program edit information files (page 17 to 24)
Mechanical system program edit information files (page 25 to 32)
File after conversion of mechanical system program edit
information file svedtdan.bin into internal codes
Cam data files of cam No.1 to 64
Cam data files of cam No.101 to 164
Cam data files of cam No.201 to 264
Cam data files of cam No.301 to 364
Information file 9 for backup and load
Information file 10 for backup and load
Motion registers (#0 to #8191) read file
Only user device range(#0 to #7999) is written.
Devices (X,Y, M/L, B, F, D, W, Special relay, Special register) except # read file
Device setting information files
Multiple CPU, I/O assigment data files
Optional data monitor information files
Communication setting information files
10 - 2
SV22
only
Advertisement
Table of Contents
