Mitsubishi Electric Melsec Q Series User Manual page 142

5 WHEN USING FILE TRANSFER FUNCTIONS (FTP SERVER)
5 - 9
(4) Various operation of the FTP
1) Designate an access target CPU if the QCPU is configured as a multiple
CPU system.
The control CPU of the Ethernet module will be the access target CPU
after login.
(quote cpuchg access target CPU <ret>)
2) Notifies file transfer to a target file without converting the file.
(binary <ret>)
3) If a password is registered in the Q/LCPU file for file transfer, set the
password in the Ethernet module.
QCPU: (quote keyword-set password <ret>)
LCPU: (quote passwd-rd password <ret>) or (quote passwd-wr
4) Performs the file transfer operation using the FTP commands described in
Section 5.6.
POINT
Writing to a parameter file used in the current operation of the Q/LCPU and to a file
of the running sequence program that is stored in the Q/LCPU program memory is
performed after placing the Q/LCPU in the STOP status.
5) Remote password lock
Changes the status of the remote password from unlock to lock if the FTP
communication port has been designated as a port subject to the remote
password check using the remote password setting. (quote password-lock <ret>)
6) Disconnecting a connection with the FTP server
The connection with the FTP server is disconnected and various FTP operations
ends. (bye <ret>)
password <ret>)
MELSEC-Q/L
5 - 9