Configuration Of Screen Display - Disp Key - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
DISPLAY LINE 1
The DISPLAY LINE 1/2 softkeys enable or disable the level lines and allow the user
/ DISPLAY
to enter the position of the lines.
LINE 2
The level lines mark the selected level in the measurement window.
These softkeys are only available in the time domain (span = 0).
Remote command:
FREQUENCY The FREQUENCY LINE 1/2 softkeys enable or disable the frequency lines 1/2 and
LINE 1/ allow the user to enter the position of the lines.
FREQUENCY
The frequency lines mark the selected frequencies in the measurement window.
LINE 2
These softkeys are only available in the frequency domain (span > 0).
Remote command:
TIME LINE 1 / The TIME LINE 1/2 softkeys enable or disable the time lines 1/2 and allow the user
TIME LINE 2 to enter the position of the lines.
The time lines mark the selected times or define search ranges (see section
Functions – MKR FCTN Key" on page
The two softkeys cannot be used in the frequency domain (span > 0).
Remote command:
4.6.2 Configuration of Screen Display – DISP Key
The DISPLAY menu allows the configuration of the diagram display on the screen
and also the selection of the display elements and colors. The POWER SAVE mode
is also configured in this menu for the display.
The test results are displayed on the screen of the R&S FSP either in a full-screen
window or in two overlapping windows. The two windows are called diagram A and
diagram B.
In the default setting, the two windows are completely decoupled from each other,
i.e. they behave like two separate instruments. This is very useful, for example with
harmonics measurements or measurements on frequency-converting DUTs, since
the input signal and the output signal lie in different frequency ranges.
Operating Manual 1164.4556.12 - 06
CALC:DLIN:STAT ON
CALC:DLIN -20dBm
CALC:FLIN:STAT ON
CALC:FLIN 120MHz
4.58).
CALC:TLIN:STAT ON
CALC:TLIN 10ms
Instrument Functions
Basic Settings
"Marker
4.157