Marker Functions - Mkr Fctn Key - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
[SIGNAL COUNT]
[NEXT]
[CNT RESOL 10 Hz]
STEPSIZE The STEPSIZE STANDARD softkey controls the knob increment/decrement of the
STANDARD
marker position and uses the grid resolution (span/625).
Remote command:
STEPSIZE The STEPSIZE SWP POINTS softkeys controls the knob increment/decrement of
SWP POINTS the marker position and uses the available sweep points configured in the SWEEP
menu.
Remote command:
MKR FILE The MKR FILE EXPORT softkey saves the data of all active markers of the window
EXPORT to a specified file. The format of the decimal point is defined by the DECIM SEP soft-
key.
Remote command:
DECIM SEP The DECIM SEP softkey selects the decimal separator between '.' (decimal point)
and ',' (comma) for the function MKR FILE EXPORT.
Remote command:
4.5.11 Marker Functions – MKR FCTN Key
The MKR FCTN menu offers further measurements with the markers:
– Measurement of noise density
– Measurement of phase noise
– Measurement of filter or signal bandwidth
– Activating of AF demodulation
On calling the menu, the entry for the last active marker is activated
MARKER
search
means of
4.58
The frequency counter is switched on. R&S FSP counts the
frequency of the signal at the marker position with a resolu-
tion of 1 kHz. The counted frequency is indicated in the
marker info field.
Changes to the submenu for setting the counter resolution.
The frequency counter resolution is increased to 10 Hz.
CALC:MARK:X:SSIZ STAN
CALC:MARK:X:SSIZ POIN
MMEM:STOR:MARK 'C:\marker.txt'
FORM:DEXP:DSEP POIN
softkey); if no marker is activated, marker 1 is activated and a maximum
(PEAK softkey) is performed. The marker can be set to the desired trace by
MKR->TRACE softkey.
(NOISE MEAS softkey)
(PHASE NOISE softkey)
(N DB DOWN
(MARKER DEMOD softkey)
Operating Manual 1164.4556.12 - 06
Instrument Functions
Analyzer Mode
softkey)
(SELECT