Signal Identification - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
PAGE UP / The PAGE UP / PAGE DOWN softkeys allow to scroll through the selection list.
PAGE DOWN
Remote command:
With the PREV hardkey, an edited table can be accepted, checked for consistency
with permissible values and stored on the hard disk under the specified table name.
The user has to confirm whether he wants to store the table (YES) or not (NO) or
whether storage is to be aborted (CANCEL). After storage has been aborted, the
table comes up again and the user can continue editing.
When the file is stored, an extension is added automatically.
If the name of the table to be stored is already used by another file, the user is asked
if the old table is to be overwritten. If the user does not wish to overwrite the old file,
he can further edit the new table, e.g. assign it a new name not used so far.
Upon exiting the EDIT menu, the table can be activated from the relevant selection
list.
4.13.4

Signal Identification

In the EXTERNAL MIXER submenu (see section
page
the signal identification.
Remote command:
SIGNAL ID The SIGNAL ID softkey activates or deactivates visual signal identification.
Two sweeps are performed alternately. Trace 1 shows the test sweep, trace 2 shows
the reference sweep. Trace 3 is not available.
1 A P
C L R W R
2 A P
C L R W R
Operating Manual 1164.4556.12 - 06
4.267), the SIGNAL ID and AUTO ID softkeys activate the functions for setting
R e f - 1 0 d B m
- 1 0
- 2 0
- 3 0
- 4 0
- 5 0
- 6 0
- 7 0
- 8 0
- 9 0
- 1 0 0
- 1 1 0
C e n t e r 5 0 G H z
LO/IF ports for external mixers - Option R&S FSP-B21
--
MIX:SIGN ON
R B W 3 M H z
V B W 1 0 M H z
S W T 1 1 5 m s
1
2 G H z /
Instrument Functions
"EXTERNAL MIXER" on
M a r k e r 1 [ T 1 ]
- 2 1 . 7 5 d B m
5 2 . 0 1 9 2 3 0 7 6 9 G H z
B
S p a n 2 0 G H z
4.277