Table Of Contents; Getting Started - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
Quick Start Guide
This manual is delivered with the instrument in printed form and in PDF format on
the CD-ROM. It provides the information needed to set up and start working with the
instrument. Basic operations and basic measurements are described. Also a brief
introduction to remote control is given. More detailed descriptions are provided in
the Operating Manual. The Quick Start Guide includes general information (e.g.
Safety Instructions) and the following chapters:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Appendix A
Appendix B
Appendix C
Operating Manual
This manual is a supplement to the Quick Start Guide and is available in PDF format
on the CD-ROM delivered with the instrument. To retain the familiar structure that
applies to all operating manuals of Rohde&Schwarz Test & Measurement instru-
ments, the chapters 1 and 3 exist, but only in form of references to the correspond-
ing Quick Start Guide chapters. The operating manual has the following chapters:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter 5
Chapter 6
Chapter 7
Chapter 8
Chapter 9
Index
Operating Manual 1164.4556.12 - 06
Front and Rear Panel
Preparing for Use
Firmware-Update and Installation of Firmware Options
Basic Operation
Basic Measurement Examples
LAN Interface
Printer Interface
External Generator Control
Brief Introduction to Remote Control
Putting into Operation
see Quick Start Guide chapters 1 and 2.

Getting Started

see Quick Start Guide chapter 5.
Manual Operation
see Quick Start Guide chapter 4.
Instrument Functions
forms a reference for manual operation of the R&S FSP and con-
tains a description of all instrument functions and their application.
Remote Control - Basics
describes the basics for programming the R&S FSP, command pro-
cessing and the status reporting system.
Remote Control - Description of Commands
lists all the remote-control commands defined for the instrument.
Remote Control - Programming Examples
contains program examples for a number of typical applications of
the R&S FSP.
Maintenance and Instrument Interfaces
describes preventive maintenance and the characteristics of the
instrument's interfaces.
Error Messages
gives a list of error messages that the R&S FSP may generate.
contains an index for the chapters 1 to 9 of the operating manual.
Documentation Overview
4.3