Differences In Gpib Behavior Between The Fsp And The Fse Families Of Instruments - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP

Differences in GPIB Behavior between the FSP and the FSE Families of Instruments

6.24 Differences in GPIB Behavior between the FSP and
the FSE Families of Instruments
The following list of commands contains the differences in syntax and behavior
between the GPIB command set of the FSP and the FSE families of instruments.
Firmware options are not described in this operating manual as the related com-
mands are not available in the basic instrument. FSE alone in column "Devices"
denotes the instrument families FSE, FSIQ, FSET and ESIB, unless otherwise
noted in column "Notes".
Devices Command (Sheet 1 of 47)
R&S FSE *CAL?
FSP
R&S FSE *CLS
FSP
R&S FSE *ESE
FSP
R&S FSE *ESR?
FSP
R&S FSE *IDN?
FSP
R&S FSE *IST?
FSP
R&S FSE *OPC?
FSP
R&S FSE *OPT?
FSP
R&S FSE *PCB
FSP
R&S FSE *PRE
FSP
R&S FSE *PSC
FSP
R&S FSE *RST
FSP
R&S FSE *SRE
FSP
R&S FSE *STB?
FSP
6.280
Remote Control – Description of Commands
Parameter Notes
R&S FSP: executes total
calibration
FSE: executes short
calibration
model indicator and
version index is different
for R&S FSP and FSE
list of available options is
slightly different for
R&S FSP and FSE, but
equally available options
have equal names
instrument settings are
slightly different for
R&S FSP and FSE due
to different instrument
specs
Operating Manual 1164.4556.12 - 06