856X: Emulation Of The Phase Noise Utility 85671A - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
6.23.5

856x: Emulation of the Phase Noise Utility 85671A

The following commands require option FS-K40 installed and enabled.
Command Supported subset
PH_MFK
PH_FMIN
PH_FMAX
PH_MKA
PH_DRIFT
PH_RLVL
PH_SMTHV
PH_VBR
PH_RMSPT
PH_RMSFL
PH_RMSFU
PH_EXIT
PH_F_UDT
PH_LMT_L
PH_MEAS
PH_MKF_D
PH_RMS
PH_RMSFT
PH_RMSX
PH_SPOTF
Operating Manual 1164.4556.12 - 06
GPIB Commands of HP Models 856xE, 8566A/B, 8568A/B and 8594E
Function
Spot frequency in Hz
Min offset frequency to be
measured
Max offset frequency to be
measured
Queries amplitude at the spot
frequency
0: for stable signals
1: for drifty
Reference level for the log plot
Trace smoothing
Filtering
Amount of data points to skip
when doing the integration
Lower integration frequency in
Hz
Upper integration frequency in
Hz
Quits phase noise
Updates internal frequency
variables
Apply limits to PH_FMIN and
PH_FMAX
Generates log frequency plot
Updates the spot frequency
Requests the rms phase noise
Updates internal frequency
variables
Calculates the rms phase noise
Executes the spot frequency
measurement
Remote Control – Description of Commands
Corresponding
HP-Models
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
HP 856xE
Status
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
available in V4.1x and
above
6.275