5Programming The Interface Configuration And Time Setup - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
Fig. 4.17 Linear frequency axis and linear interpolation
Fig. 4.18 Logarithmic frequency axis and interpolation
Comment - Entry of comment
Any comment with a maximum length of 50 characters can be entered.
Remote command:
INSERT LINE The INSERT LINE softkey inserts an empty line above the marked reference value.
When entering a new reference value in the line, the ascending order of frequencies
must be taken into consideration, however.
Remote command:
DELETE LINE The DELETE LINE softkey deletes the marked reference value (complete line). The
reference values that follow move one line up.
Remote command:
SAVE TRD The SAVE TRD FACTOR softkey saves the changed table in a file on the internal
FACTOR hard disk.
If there is already a transducer factor that has the same name, a confirmation query
is output.
If the new factor is active, the new values become immediately valid.
Remote command:
4.6.3.5 Programming the Interface Configuration and Time Setup
The GENERAL SETUP softkey opens a submenu in which the general instrument
parameters can be set up. In addition to the configuration of the digital interfaces
(IECBUS, COM), the date and time may be entered.
The current settings are displayed in tabular form on the display screen where they
may be edited.
4.172
CORR:TRAN:COMM <string>
--
--
--
(executed automatically after the definition of the
reference values)
Operating Manual 1164.4556.12 - 06
Instrument Functions
Basic Settings