Resetting Values Of The Status Reporting System - Rohde & Schwarz R&S FSP Series Operating Manual

Spectrum analyzer

Table of Contents

Resetting Values of the Status Reporting System

The table below comprises the different commands and events causing the status

reporting system to be reset. None of the commands, except for *RST and SYSTem:

PRESet influences the functional instrument settings. In particular, DCL does not

change the instrument settings.

Clear STB,ESR

Clear SRE,ESE

Clear EVENTt parts of the

Clear Enable parts of all

OPERation and QUEStionable

registers, Fill Enable parts of all

other registers with "1".

Fill PTRansition parts with "1" ,

Clear NTRansition parts

Clear error queue

Clear output buffer

Clear command processing and

input buffer

1) Every command being the first in a command line, i.e., immediately following a <PROGRAM MESSAGE TERMINATOR> clears the output

Switching on

supply voltage

(Device Clear,

Power-On-Status-

Device Clear)

Remote Control – Basics

Status Reporting System

Operating Manual 1164.4556.12 - 06

Show Quick Links

Table of Contents