8Status:questionable:limit<1|2> Register - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
5.7.3.8 STATus:QUEStionable:LIMit<1|2> Register
This register comprises information about the observance of limit lines in the corre-
sponding measurement window (LIMit 1 corresponds to Screen A, LIMit 2 to Screen
B). It can be queried with commands STATus:QUEStionable:LIMit<1|2>:
CONDition? and STATus:QUEStionable:LIMit<1|2>[:EVENt]?.
Bit
No.
0
1
2
3
4
5
6
7
8 to 14
15
Operating Manual 1164.4556.12 - 06
Meaning
LIMit 1 FAIL
This bit is set if limit line 1 is violated.
LIMit 2 FAIL
This bit is set if limit line 2 is violated.
LIMit 3 FAIL
This bit is set if limit line 3 is violated.
LIMit 4 FAIL
This bit is set if limit line 4 is violated.
LIMit 5 FAIL
This bit is set if limit line 5 is violated.
LIMit 6 FAIL
This bit is set if limit line 6 is violated.
LIMit 7 FAIL
This bit is set if limit line 7 is violated.
LIMit 8 FAIL
This bit is set if limit line 8 is violated.
not used
This bit is always 0.
Remote Control – Basics
Status Reporting System
5.27