8Firmware Update - Rohde & Schwarz R&S FSP Series Operating Manual

R&S FSP
4.6.3.8 Firmware Update
For the latest firmware version refer to the Rohde & Schwarz internet site and down-
load the most up-to-date firmware.
A detailed description about performing the firmware update in the intrument is given
in the release note, provided on this CD. The release note is also downloadable
from the Rohde & Schwarz internet site.
The installation of a new firmware version can be performed using a memory stick or
the built-in disk drive.
The installation program is called in the SETUP menu.
FIRMWARE
FIRMWARE UPDATE
UPDATE
RESTORE FIRMWARE
UPDATE PATH
The FIRMWARE UPDATE softkey opens the subdirectory for installing/deinstalling
new firmware versions.
Remote command:
FIRMWARE The FIRMWARE UPDATE softkey starts the installation program and leads the user
UPDATE through the remaining steps of the update.
Remote command:
RESTORE The RESTORE FIRMWARE softkey restores the previous firmware version
FIRMWARE
Remote command:
UPDATE PATH The UPDATE PATH softkey is used to select the drive and directories under which
the archive files for the firmware update are stored.
The firmware update can thus also be performed via network drives or USB memory
sticks/USB-CD-ROM drives.
Remote command:
APPL SETUP The APPL SETUP RECOVERY (Application Setup Recovery) softkey controls the
RECOVERY
instrument behaviour when changing the active application, e.g from SPECTRUM to
FM DEMOD and back from FM DEMOD to SPECTRUM.
In the default state OFF a few parameters of the current analyzer setting are passed
to the application (e.g. center frequency, level settings) or from the application back
to the analyzer mode.
If APPL SETUP RECOVERY is switched ON, the settings of the applications are
independent of each other. Leaving the FM DEMOD application will restore the pre-
vious state of the ANALYZER.
The individual application settings are stored on the internal harddisk.
4.192
--
"SYST:FIRM:UPD 'D:\USER\FWUPDATE'"
--
"SYST:FIRM:UPD 'D:\USER\FWUPDATE'"
Operating Manual 1164.4556.12 - 06
Instrument Functions
Basic Settings