Step 21: Attach Roof Ends
Part 1
A: On the Front and Back Walls remove the 2 outside (H9) Hex Bolts attached at the top of the assembly from
Step 1, Part 2. Leave the (TN1) T-nuts in. The (FW1) Flat Washers and (LW1) Lock Washers will be used in
Step B. (fig. 21.1)
Fig. 21.1
Back Wall
Remove these bolts on both Front
and Back Walls, keeping lock washers
and flat washers for next step. Do not
remove the t-nuts.
53
Front Wall