Programming Or Changing Ccr Destinations; Testing Your Custom System Answer And Ccr - Nortel Compact ICS 7.1 Coordinator Manual

94 / Auto Attendant
Programming or changing CCR
destinations
≤
1. Press
(the default password is ¤‹fl›fl).
Press NEXT until the display shows CCR tree. The choices are SHOW,
2.
EXIT, and PREV.
Press ≠. The display shows Dial 0: and the current
3.
destination when the caller presses zero. Your choices are CHNGE and
NEXT.
Press CHNGE to select the appropriate destination.
4.
Each number from zero to nine and • can direct a call to the attendant
telephone or one of the nine CCR groups. The • can be set up to make
the system play the CCR greeting again (Repeat). If a digit is set to None,
it has no destination.
Using NEXT and CHNGE, select the destinations for the remaining digits.

Testing your custom System Answer and CCR

If you have more than one external line, you can call in to hear your
greetings by dialing the number used by external callers to call the
attendant set or a line that is answered using CCR.
To call systems with only one external line, you must go to a telephone that
is not connected to your system.
Compact ICS 7.1 System Coordinator Guide
•°‹‹ and enter the System Coordinator password
N0130955 01