Adding Or Removing Members From A Group - Nortel Compact ICS 7.1 Coordinator Manual

166 / Programming Hunt Groups
• where a call goes if all members are busy
Note: Videophones should not be placed in Hunt Groups. Hunt Groups
allow one B channel connection at a time and videophones use two
B channels.
Features affected by Hunt Groups include:
• Auto Attendant
• Call Forward All Calls
• Call Forward No Answer
• Call Forward on Busy
• Group Pickup
• Transfer via Hold
• Priority Call
• Line Redirection
• Page Zones
• Voice Call
Note: Fixed external cadencing is provided for all external Hunt Group
calls regardless of whether or not they have been answered and
transferred.
Adding or removing members from a
group
A DN can be associated with a member of a Hunt Group and is called a
member DN.
Members of the group can be any Norstar or BST telephone or ISDN
terminal. A Norstar or BST telephone can be in more than one Hunt Group
but is considered a member in each Hunt Group, increasing the total
number of members in the system.
There can be only one appearance of the Hunt Group on a telephone, no
matter how many lines are assigned to the group.
Hunt Group DNs cannot be members of other Hunt Groups.
Compact ICS 7.1 System Coordinator Guide N0130955 01