Nortel Compact ICS 7.1 Coordinator Manual page 30

30 / Frequently used programming operations
Choose a speed dial code
Terminals&Setsˆ
Sys Speed Dialˆ
Speed dial #:___
You can pick any system speed dial code between 001 and 255.
Speed dial #:001ˆ
Add or change the telephone number
001:No number
CHANGE
001:___
CANCL
001:nnnnnnnn__
CANCL BKSP
Select a line for the speed dial code
001:nnnnnnnn
CLR CHANGE
Use prime line
CHANGE
Stop pressing CHANGE when the display shows the prime line again.
Use prime line
CHANGE
Compact ICS 7.1 System Coordinator Guide
Press ' three times.
Press ≠.
Press ‚‚⁄.
LIST
Press ≠.
FIND
Press CHANGE.
Use the dialpad to program the telephone number
that you want to add. The telephone number can
OK
be up to 24 digits long.
Your display shows the telephone number, and
not n's as shown here. Press OK.
OK
Press '.
Press CHANGE to see your options: Use prime
line, a specific line (for example Use line: 01),
a line pool (for example Pool code:71), or Use
routing tbl.
In this example, the system selects the prime line
automatically (the most common choice), to dial
speed dial code 001.
N0130955 01