Viewing A Call Log Item; Erasing Log Items; Making A Call Using Call Log - Nortel Compact ICS 7.1 Coordinator Manual

140 / Tracking your incoming calls

Viewing a Call Log item

Press √ or MORE to view the information for a call log item.

Erasing log items

You should routinely erase log items that you have read, to make space for
new items in your log.
1. Display the item you want to erase.
Press ≥ or ERASE.
2.
Press ® to exit.
3.
If you accidentally erase an item, you can retrieve it.
Press ≥ or UNDO immediately after accidentally erasing an item.
1.
Press ® to exit.
2.

Making a call using Call Log

You may find it helpful to place calls from within your Call Log. The
number stored for each call may vary depending on the type of call. For
example, if the call was placed from a Centrex or PBX system, the first few
numbers may need to be trimmed before you can make the call. If the
number you want to call is long distance, or if you want to use a line pool,
you may need to add numbers.
To place a call from a call log
1. Display the log item for the call you want to place.
2. Display the associated telephone number.
Press √ or TRIM, once for every digit that you want to
3.
remove.
4. Dial any extra digits required.
5. Press an external line or line pool button.
6. Lift the handset. (This is not necessary if handsfree is programmed at
your telephone.) The displayed number is dialed.
Compact ICS 7.1 System Coordinator Guide N0130955 01