Mcid (Profile 2); Network Call Diversion (Profile 2) - Nortel Compact ICS 7.1 Coordinator Manual

MCID (profile 2)

The MCID feature allows you to use ≤°·‡ to have call
information recorded on the central office system for an incoming call on
a specific line (EUROISDN lines, only).
The user must invoke the feature code either during the active call or within
within 30 seconds (time varies on different networks) after the caller hangs
up, but before the user hangs up.
MCID prompts
Call traced
No response
Not incoming
Not available
Not subscribed
Invalid state
Not allowed

Network Call Diversion (profile 2)

This feature is a network function that allows forwarding and redirection of
calls outside the Norstar network when using an ETSI ISDN line.
Functionality is similar to that of External Call Forward (ECF). NCD
redirects calls using the same line on which they arrive. Call forward is
efficient since there is no need for additional outside lines.
N0130955 01
The MCID request was accepted by the network.
No response to the MCID request.
MCID can only be invoked on received calls.
The caller information is not available. The CO is
not able to log the information or it is not an ETSI
BRI type of call.
MCID feature is not subscribed to.
MCID is not allowed in the current state of the
call.
Invalid interaction with another supplementary
service.
ISDN / 207
Compact ICS 7.1 System Coordinator Guide