Default Button Assignments; 7316E Button Defaults - Nortel Compact ICS 7.1 Coordinator Manual

150 / Customizing your telephone

Default button assignments

During Startup, the installer chooses one of the available templates. Default
features are assigned automatically to the programmable buttons on
installed telephones. These defaults vary based on the chosen template, and
the telephone model. The Programming Record also contains a list of
default settings.
The default features are listed below.
Tips -
determine the type of template programmed into your system.
Not all templates are available in all software loads.

7316E button defaults

Refer to your Programming Records to identify the current button
programming for each telephone or group of telephones.
• This telephone has separate handsfree, mute and headset buttons under
the dial pad.
• The current incoming call on this telephone defaults to the voice path
last used. For example, if you answered the previous call using your
headset, the next call will come in over your headset.
• Line numbering starts on button 09.
7316E
Compact ICS 7.1 System Coordinator Guide
Please consult your customer service representative to
Upper buttons
Lower right button set
Lower left button set
N0130955 01