Changing A User Speed Dial; Changing Call Log Options; Changing How Calls Are Dialed - Nortel Compact ICS 7.1 Coordinator Manual

Changing a User Speed Dial

Press ≠ at User Speed Dial. The display shows the number
1.
of speed dial codes that are available.
Press ' to see the first speed dial code (256).
2.
Press ' to move through all the speed dial codes.
3.
Press ≠ at the code you want to change.
4.
Press CHANGE and enter the telephone number the same way you
5.
would dial it on the telephone.
Press OK.
6.
Press ' and choose the line (or enter a code for a line pool)
7.
the speed dial code should use.
Use the line pool code to select a particular line pool for use with Speed
Dial. If you select Use routing tbl, a line or pool is chosen by the routing
programming according to the initial digits in the number.
The route you choose for a User Speed Dial code must be one that the
telephone can use. For example, if the telephone does not have access to
Line Pool B and you use that pool code with the speed dial code, the code
does not work. Lines and line pools are assigned to the telephones by the
system administrator. Refer to the Compact ICS 7.1 Installer Guide for
details.
To change a system speed dial code, see ''Adding or changing a system
speed dial'' on page 29.

Changing Call Log options

Press ≠ at Call log opt'ns...
1.
Press CHANGE until you see the option you want to use. See ''Call Log
2.
options'' on page 138

Changing how calls are dialed

Press ≠ at Dialing opt'ns...
1.
Press CHANGE until you see the option you want to use.
2.
N0130955 01
User Preferences / 161
Compact ICS 7.1 System Coordinator Guide