Nortel Compact ICS 7.1 Coordinator Manual page 148

148 / Customizing your telephone
Displays
<Feature name>
SHOW
Enter code:
F__
QUIT CLEAR
Feature code:
QUIT
Feature moved
Press a button
EXIT
Program and HOLD
Program and OK
QUIT
For other displays, see ''Common feature displays'' on page 243.
Compact ICS 7.1 System Coordinator Guide
The name of the feature assigned to a button is
displayed when you press the button. SHOW
OK
appears when there is more information
available. Press £ or SHOW for additional
information.
If you are checking a speed dial button, enter
the three-digit speed dial code that you want to
check.
Enter the feature code, or press ® or QUIT to
quit programming or CLEAR to clear the numbers
you have entered. The system accepts the
entry as soon as you enter a valid feature code.
Press ≤ and enter the feature code you want
to assign to the button. You cannot enter invalid
codes.
You have programmed a button with a feature
that was already programmed onto another
button. The feature has moved to the button
you just programmed. Its original button is now
blank.
Press the button you want to check. Press ≤
or EXIT when you are finished.
Enter the number you want to program and
≥
press
≥
.
Enter the number you want to program and
press OK. To erase the button, just press
OK
or OK.
. To erase the button, just press
≥
N0130955 01