Nortel Compact ICS 7.1 Coordinator Manual page 100

100 / Time savers for making calls
For 7000 and 7100 digital phones, analog telephones and Digital
Mobility phones, you can only enter a line pool access code or a
destination code.
4. Enter the number you want to program.
Press ≥ or OK.
5.
Displays
256:9___
CANCL BKSP
Enter digits
QUIT
Invalid code
No number stored
Program and HOLD
Program and OK
QUIT
Select a line
Unknown number
For other displays, see ''Common feature displays'' on page 243.
Compact ICS 7.1 System Coordinator Guide
Continue entering the number you want to
program. You can change the number by pressing
OK
√
BKSP or
≥
press
Enter the telephone number you want to program
exactly as you would if you were dialing it
OK
normally. When you are finished, press
OK.
You have entered a code outside the code range
(001-255 for system, 256-279 for user).
There is no number stored on the speed dial code
you have dialed.
If you want to program a line or line pool selection
for this speed dial number, select the line or line
pool. Otherwise, enter the telephone number
exactly as if you were dialing it normally. When
you are finished, press
If you want to program a line or line pool selection
for this speed dial number, select the line or line
OK
pool. Otherwise, enter the telephone number you
want to program exactly as if you were dialing it
normally. When you are finished, press OK.
There is no line associated with the speed dial
number you are trying to use. Select a free
external line or line pool and enter the speed dial
feature code again.
The system cannot dial the number stored.
Reprogram the number.
. When you are finished,
or OK.
≥
.
≥
or
N0130955 01