Nortel Compact ICS 7.1 Coordinator Manual page 246

246 / Common feature displays
Make calls first
No free lines
No line selected
In use:21
Incoming only
9__
QUIT BKSP
Invalid number
Line denied
Restricted call
Compact ICS 7.1 System Coordinator Guide
The feature you tried to use requires you to be on
an active call at your telephone. This display also
appears when information about a call has been
cleared by a system reset.
All the lines or line pools available to the
telephone are in use. This display also appears
when you have tried to dial an external number or
use a feature that conflicts with the lines, line
pools or prime line used by the telephone.This
must be corrected by your customer service
representative or installer.
The telephone has been set up to dial an external
number on a prime line but the telephone does
not have a prime line. This must be corrected by
your customer service representative or installer.
You have tried to program redirection while
someone else is programming redirection. Only
one person can program line redirection at a
time.
The line you are trying to use for redirecting calls
is for incoming calls only. Choose an outgoing
line.
Continue entering digits. Press
BKSP to delete incorrect digits. Press
OK
when you are finished.
You have entered an invalid line pool code or an
invalid destination code.
You have selected a line that is private to another
telephone.
The destination you have chosen for line
redirection is restricted.
√
or
≥
or OK
N0130955 01