Changing Handsfree Answerback For A Telephone - Nortel Compact ICS 7.1 Coordinator Manual

phones, this button is assigned as a handsfree-only button. The mute button
is located under the dial pad.
The handsfree setting for 7316E digital phones only displays Auto or
None. The handsfree button on this set is located under the dialpad. If
Handsfree is set to None, the handsfree button does not function. Also, if
the 7316E is attached to a system with software older than version 6.1, it
acts like the 7316 telephone, and the handsfree button under the dial pad is
not active.

Changing handsfree answerback for a telephone

Handsfree answerback allows you to answer a voice call without lifting the
handset.
It is always turned off for an 7000 and 7100 digital phones, analog
telephones, and the Digital Mobility phones.
You can turn handsfree answerback on or off for a telephone that is
programmed to use handsfree.
1. Place the programming template over the appropriate buttons of the
programming telephone.
Press ≤••¤flfl‹››.
2.
¤‹fl›fl
3. Press
Press ≠ and enter the internal number of the telephone you
4.
want to program.
Press ≠ twice.
5.
Press ' four times.
6.
Choose a setting (Yes or No) at HF answerback: using the CHANGE
7.
button.
N0130955 01
(the default System Coordinator password).
Compact ICS 7.1 System Coordinator Guide
Answering calls / 67