Programming The Alarm Feature - Nortel Compact ICS 7.1 Coordinator Manual

184 / Using the Hospitality features

Programming the alarm feature

If you want to allow the room sets to program wake-up alarms, there are a
couple of program settings that need to be entered.
1. Place the appropriate programming overlay on the set you are using to
do programming.
Press ≤••¤flfl‹›› (CONFIG). The display shows
2.
Password:.
Press ¤‹fl›fl (ADMIN). The display shows
3.
Terminals&Sets.
Press ' until the display shows Hospitality.
4.
Press ≠. Room/desk info displays.
5.
Press ≠ until Alarm displays.
6.
Press ≠. Attn attempts:3 displays.
7.
Press CHANGE until you find the number you want (1-5).
8.
Press '. Retry intrvl:4 displays.
9.
10. Press CHANGE until you find the number you want (2, 4, 6, or 8).
11. Press '. Attn duration: 15 displays.
12. Press CHANGE until you find the number of seconds you want (10, 15,
20, 30, 40, 50).
13. Press '. Time format:12 hr displays.
14. Press CHANGE to choose either 12hr or 24hr.
15. Press '. Expired alarms displays.
16. Press ≠. Notify set:None displays.
17. Press CHANGE to enter a set DN to be notified.
18. Press '. Use tone: N displays.
19. Press CHANGE to choose either Y (yes) or N (no).
20. Press ® to exit or ' to continue programming.
Compact ICS 7.1 System Coordinator Guide N0130955 01