Ending A Session - Nortel Compact ICS 7.1 Coordinator Manual

26 / Getting started with Norstar

Ending a session

Display digits:Y
CHANGE
End of session
The system goes ahead with any changes you make to
programming as soon as you move away from a setting, either by
using the navigation buttons or by pressing
You can see if the changes you made to telephone programming
have taken effect by pressing the UPDATE display key. The
display shows you how many telephones have not been updated.
Press DNs to see the specific extensions where programming
changes have not taken effect yet. Items disappear from the list
as they are updated.
Record any changes you make in the Norstar Programming
Record. If there is a problem with the system, the installer needs
to see a history of the changes you made. Remember to inform
people in your office of any changes you made that affect them.
For example, you may change system speed dial codes or change
the number of rings before an unanswered telephone is
forwarded.
Compact ICS 7.1 System Coordinator Guide
®
Press to end the session.
After a few seconds, the time and date reappears
on the display.
®
.
N0130955 01