Nortel Compact ICS 7.1 Coordinator Manual page 199

Priority Call
Privacy
Ring Again
Reply to a Ring
Again signal
Saved Number
Redial
System Speed
Dial
N0130955 01
˚•fl·
Allows you to interrupt an internal call in progress on a
Norstar telephone using Voice Call Deny or Do Not Disturb.
The calls at the telephone you are calling are automatically
put on hold.
Telephones must be programmed to use Priority Call. See
''Priority Call'' on page 77 for more information.
˚•°‹
Prevents another telephone that shares your line from joining
your current call, or permits another telephone that shares
your line to join the call.
˚•¤
Allows you to queue a call to another Norstar telephone that
is busy or is not answered, or to a busy line in a line pool. You
can only use Ring Again on calls placed on an intercom line.
When the telephone is available, you are alerted with one
short ring from your telephone.
To connect with a Ring Again request when you are on a call
(or your telephone is off-hook):
˚¤
• Enter
hold.
• To return to the caller on hold, enter
˚ ¤
To connect with a ring again request when your telephone is
on-hook:
• Lift the handset. The Ring Again number is automatically
redialed.
If you do not respond to the Ring Again signal within 30
seconds, Ring Again is canceled.
˚•fl‡
Allows you to save an external number while you are on a call
or while the called telephone is ringing. To automatically
redial the saved number:
˚•fl‡
• Enter
˚•‚
Allows you to use a speed dial code to quickly dial
preprogrammed telephone numbers. See ''Using Speed
Dial'' on page 99 for more information.
You cannot program personal speed dial numbers for the
telephone connected to the I-ATA.
Telephone features / 199
˚£¤
Cancel
. This automatically places your call on
.
.
<plus the speed dial code>
Compact ICS 7.1 System Coordinator Guide