Using Call Forward At Your Telephone; Overriding Call Forward; Changing The Automatic Call Forward Settings - Nortel Compact ICS 7.1 Coordinator Manual

116 / Forwarding your calls

Using Call Forward at your telephone

When you use ≤›, all calls go to the destination you select, regardless
of how Forward on busy and Forward no answer are programmed.
Tip -
Call Forward all calls setting is overridden by the Hunt
Group routing for Hunt Group calls. For more information
about Hunt Groups, see ''Programming Hunt Groups'' on
page 165.
If the telephone to which you forwarded your calls does not have the same
external lines as your telephone, the forwarded calls appear on intercom
buttons.
If a call is forwarded, it does not ring at your telephone. However, the line
indicator flashes. You can answer the call by pressing the button next to the
flashing indicator. This does not cancel call forward for other calls coming
in.
Tip -
forward their calls to one another, be aware that it is
possible to set up forward loops where a call is forwarded
from one telephone to another in a circle, and is never
answered anywhere.

Overriding Call Forward

If you call someone who has their calls forwarded to you, your call rings at
that receiving telephone even though that telephone has been set to forward
calls to you.

Changing the automatic Call Forward settings

Call forwarding occurs automatically when a call is not answered or the
line is busy. These automatic options are changed in programming.
For step-by-step instructions, see ''Change where a call goes when there is
no answer'' on page 35.
Compact ICS 7.1 System Coordinator Guide
If your Norstar set is a member of a Hunt Group, the
If you are one of a group of people who regularly
N0130955 01