Using The Administration Set To Control Alarms - Nortel Compact ICS 7.1 Coordinator Manual

Using the Administration set to control alarms

Only a Hospitality Services set can use this alarm administration feature.
This feature is also associated with a room number, and cannot be used on
common sets.
Use this feature to:
• query a current or last alarm time set for a room
• assign an alarm time for any room
• change an alarm time for any room
• cancel an pending alarm for any room
To program the alarm, follow these steps:
Press ≤°‡‡.
1.
2. Enter the Desk admin password if you are prompted for a password.
The set displays: al of rm#:
3. Enter the room number.
Press VIEW. The set displays Alrm: 07:00am OFF:.
4.
If the alarm time is correct, press the ON/OFF display key.
If you want to change the time, enter a new four-digit alarm time.
If the clock uses a 24-hour format, enter an hour between 00 and 23,
and minutes between 00 and 59. The set displays: Alarm ON hh:mm
If the clock uses a 12-hour format, enter the time, then when the set
displays: hh:mm AM or PM?, press AM or PM. The set displays: Alarm ON
hh:mm.
Press ® to exit.
5.
N0130955 01
Using the Hospitality features / 185
Compact ICS 7.1 System Coordinator Guide