To Enable Mcid And Network Diversion; Configuring Etsi Euro Network Services - Nortel BCM50 Configuration Manual

3 Select the TAT check box.

Configuring ETSI Euro network services

If your system has ETSI ISDN BRI/PRI lines, you can activate the malicious call identification
(MCID) and Network Diversion features. Advice of Charge-End of Call (AOCE) is active if your
service provider has activated that service on the line.
When the features are activated, users can:
• display a call charge
• redirect calls over the ETSI ISDN BRI/PRI line to the outside network
• tag malicious calls
Advice of Charge-End of Call (AOCE) — AOCE is a supplementary service available from your
service provider on ETSI ISDN BRI/PRI links. With this feature, the BCM user can view the
charges for an outgoing call once the call completes. This information is also reported to the Call
Detail Reporting Application. The information can be provided in currency or charging units,
depending on how the feature is set up by your service provider.
To invoke the feature, the user presses FEATURE 818.

To enable MCID and network diversion

1
Click Configuration > Telephony > Dialing Plan > Private Network.
2 Locate the ETSI subpanel.
Select the check boxes of the required options.
Table 64 lists the possible values for ETSI.
The Description column of the table describes the feature and how the user activates each feature
from their telephone.
Chapter 34 Private networking: MCDN and ETSI network features
Networking Configuration Guide
321