To Initialize Voice Mail; Using The Startup Profile To Configure The System; Startup Profile Requirements - Nortel BCM50 Installation And Configuration Manual

32 Chapter 3 Configuring the BCM50 system
Refer to the BCM50 Telset Administration Guide (N0027176) for information on using Telset
Administration to set this parameter.
Other telephony startup parameters are configured using Feature **CONFIG. Refer to the BCM50
Telset Administration Guide (N0027176) for more information.

To initialize voice mail

You initialize your voice mail system using Feature 983 from a two-line display telephone.
Refer to the CallPilot Telephone Administation Guide (N0027331) for information on using Telset
Administration to initialize your voice mail system.

Using the Startup Profile to configure the system

The Startup Profile tool allows you to quickly set several common BCM50 configuration
parameters. You create the Startup Profile using Microsoft Excel. You then use a USB storage
device to transfer the data to the BCM50.
For more information on using the Startup Profile, refer to the BCM50 Installation and
Maintenance Guide (N027152).

Startup Profile requirements

To use the Startup Profile template, you need the following:
• a computer with a USB port
• Microsoft Excel 2000 or later
• the Nortel BCM50 Startup Profile template (Microsoft Excel template)
If you do not have the Startup Profile template on your computer, you can get a copy from the
the Nortel support website (www.nortel.com/support), or the Administrator Applications page
on the main unit. Refer to
getting the Startup Profile template from the main unit
• a portable USB storage device compatible with USB 1.1 (formatted for FAT32)
Note: The Startup Profile template uses macros to perform certain functions. You
must set your Excel macro security level to medium or low to enable the macros:
•
•
•
•
N0027149 01 N0027149 01
"To download the Startup Profile template" on page 33
From the Tools menu, select Macros, then select Security..., and select
Medium or Low.
Exit from Excel.
Open the Startup Profile template (in Excel).
Enable macros if prompted.
for details on