Chapter 13
Using Telset Administration to set the basic
parameters
Telset Administration allows you to use a digital telephone with a two-line display to set the
BCM50 configuration parameters.
You cannot set all the basic parameters using Telset Administration. Therefore, after configuring
the initial parameters, you must use Element Manager to set the startup parameters. Refer to
"Configuring the startup parameters" on page
Refer to the BCM50 Telset Administration Guide (N0027176) for more information on Telset
Administration.
Figure 53
shows an overview of using Telset Administration to set the basic parameters.
Figure 53 Overview of using Telset Administration
Chapter 13 Using Telset Administration to set the basic parameters
137.
BCM50 Installation and Maintenance Guide
127