Ccni Slot And Port Assignments - Nortel Meridian 1 Hardware Replacement Manual

Page 196 of 250
Figure 33
3PE Termination Panel in the Core/Net module (top view)

cCNI slot and port assignments

553-3001-520 Standard 17.00 January 2002
Replacing equipment
Port 9-0:
direct connection
to cCNI Transition Card
(factory installed)
.
Each system contains a minimum of one and a maximum of four CNI cards.
Each cCNI card contains two ports to support up to two Network groups.
cCNI cards are identified by slot and port. Each port is assigned in software
to a specific Network group. Use the System Layout Plan to determine the
connections for your system.
• Each 3PE card has two faceplate connections: J3 and J4. Two cables are
used for each card.
Termination Panel
cCNI Transition Cables
(factory installed)
553-9488