Appendix K; System Region Attributes; Regional Default System Values - Nortel BCM50 Installation And Maintenance Manual

Appendix K

System region attributes

This section describes some of the differences in the system defaults. These defaults are set based
on the region or telephony or CallPilot template that you select in the Quick Start wizard when the
system is first configured. Each region is designed using a set of system defaults that provide
specific functionality for the geographical area in which the system is deployed.
This section covers the following main topics:
•

"Regional default system values"

• "ISDN line services" on page 233
• "Define time zones by country and language" on page 234
• "System defaults" on page 235
• "Digital trunk types" on page 237
• "CallPilot regions" on page 238
Regional default system values
Each region requires a unique set of system default values. The system defaults provide specific
functionality for the region in which the system is deployed and include the following:
• specific languages
• specific order in which the languages are set as default (language 1)
• the type of trunks
This section describes the following topics:
• "Regional language default values" on page 230
• "Regional caller ID display formats" on page 231
• "Regional companding law" on page 231
• "Regional media bay module availability" on page 231
• "Regional PRI line protocol support" on page 232
• "Restriction filter defaults" on page 236
BCM50 Installation and Maintenance Guide
229