LACP individual
© Copyright Lenovo 2015
Static trunks are listed as trunks 1 though 64. Dynamic trunks are listed as 65
through 128.
Ports assigned with an LACP admin key are prevented by default from forming
individual links if they cannot join an LACP trunk group. To override this
behavior, use the following commands:
CN4093(config)# interface port <port no or range>
CN4093(configif)# no lacp suspendindividual
This allows the selected ports to be treated as normal link‐up ports, which may
forward data traffic according to STP, Hot Links or other applications, if they do
not receive any LACPDUs.
To configure the LACP individual setting for all the ports in a static LACP trunk,
use the following commands:
CN4093(configif)# interface portchannel lacp <adminkey of the LAG>
CN4093(configif)# [no] lacp suspendindividual
Note: By default, external ports are configured with lacp suspend-individual,
while internal ports are configured with no lacp suspend-individual.
Chapter 10: Ports and Trunking
143