Setpoint Programmer - gefran 650 Series Manual

SETPOINT PROGRAMMER

The various setpoint profiles with ramps, holds, trigger inputs and event outputs can be configured directly from the device keyboard or with
GF_eXpress in an easy to use by tracing the required profile.
Model 1350 (1/4 DIN) offers the widest and most complete operator interface in its category: a "dashboard" that simultaneously shows the
variable, setpoint, scrolling messages with 7 segments, step number, active program, and bargraph for program step times.
12 Segments with configurable
ramps and hold times
PREVENTIVE MAINTENANCE AND ENERGY COUNTER
With the energy monitor function you can count and save the energy consumed by the process.
In case of deviations from average consumption, the controller signals with a physical output and configurable messages.
These functions accompany the preventive maintenance function, which monitors the life cycle of the actuators and Short Wave Infrared
(SWIR) lamps.
This lets you:
- predict any potential machine breakdowns
- schedule maintenance in advance
- prevent system shutdowns
- maximize machine up time and limit costly emergency shut downs
ENERGY MONITOR
Measures and monitors system
energy consumption.
Monitors and signals if system exceeds
PREVENTIVE MAINTENANCE
Cycle counter and alarm messages
to monitor system cycles.
8 8
SETPOINT
PROGRAMMING
START COOKING PROGRAM
expected values.
CONSUMPTION
CHANGE LAMP 5
80 KWH
WARNING:
80 KWH