Making Detailed Settings - Siemens SINAMICS S120 Getting Started

Commissioning
5.4 Creating a project offline in Startdrive
The additionally activated subareas are displayed in the Inspector window under "Motor
details".
Figure 5-23
8. Acquire the required motor data of the inserted motor.
Note
The pink input fields are mandatory input fields. If appropriate values are not entered in
these fields, then the device configuration cannot be completed.
Note
We recommend entering the values in the inspector window under "Motor details".
Individual parameters may be locked in the parameter view and cannot be edited.
Result
The motor is specified with the manually acquired motor data. The white area turns dark
gray.
If you have selected a motor with encoder, the encoder and the encoder evaluation are also
added automatically.
5.4.5.4

Making detailed settings

You can configure the following motor details for motors during commissioning:
● Basic parameter assignment
● Rating plate values
● Motor brake
90
Motor specified
Getting Started, 12/2018, 6SL3097-5AG30-0BP0