Permanently Save The Settings - Siemens SINAMICS S120 Getting Started

4.5

Permanently save the settings

Saving configurations in the project
In Startdrive, settings are predominantly made via screen forms. The complete project must
be saved in order that the settings made are permanently active.
1. Click "Save project" in the toolbar.
OR
Select the "Project > Save" or "Project > Save as" menu.
Non-volatile saving to memory card
The settings during parameterization are only saved volatile. They are lost when you switch
off the drive unit.
Saving online data:
Click the
The current project settings are stored non-volatile on the memory card of the drive unit.
Saving offline data:
For storing in a power-independent manner, it is important that the settings made are not
only saved in the project on the PC, but are also stored permanently on the memory card of
the drive unit (also known as "Copy RAM to ROM"). There must be a physical LAN
connection between your PG/PC and your drive for this purpose.
1. Establish a physical LAN connection between your PG/PC and your drive (see Chapter
"Establishing an online connection to the drive (Page 101)").
2. Load the project data in your drive unit(s).
Proceed as described in Chapter "Loading the project to the target device (Page 163)" for
this purpose.
3. Click the
The current project settings are stored non-volatile on the memory card of the drive unit.
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
icon in the function view of the active Startdrive project.
icon in the function view of the active Startdrive project.
Fundamentals
4.5 Permanently save the settings
59