Performing Basic Parameterization; Control Unit; Web Server; Activating And Configuring The Web Server - Siemens SINAMICS S120 Getting Started

Performing basic parameterization

6.1

Control Unit

6.1.1

Web server

6.1.1.1

Activating and configuring the web server

☐
The web server provides information on a SINAMICS device via its web pages. The server is
accessed using an Internet browser (see Chapter "Supported browsers (Page 117)"). You
can find further information on access to the web server and the functions of the web server
in Chapter "Web server" of the SINAMICS S120 Function Manual Drive Functions.
You configure the web server in the Startdrive commissioning tool in the "Web server"
screen form. Generally you can perform the configuration both in the ONLINE as well as in
the OFFLINE mode of the Startdrive. We recommend that you configure the web server
OFFLINE.
Figure 6-1
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
"Drive control > Parameters > Basic parameterization > Web server"
Web server configuration with default settings
6
115