Comparing Parameter Settings - Siemens SINAMICS S120 Getting Started

4.4

Comparing parameter settings

The actual parameters of a drive object can be compared with another parameter set using
the comparison function in the parameter view.
You can compare the following values of a parameter:
● Deactivate comparison
● Offline - Factory setting
● Online - Offline
● Online - Factory setting
Comparing parameters
Proceed as follows when comparing the parameters of a drive object with another parameter
set.
1. Open the parameter view for the device whose parameters you want to compare.
2. Click the black arrow icon of the
with another data set" button.
A selection list containing the comparison options opens:
– Deactivate comparison
– Offline - Factory setting (default setting in offline mode)
– Online - Offline (default setting in online mode)
– Online - Factory setting
3. Select a comparison option.
The selected comparison option is executed as follows:
– The "Comparison" column is displayed.
– The comparison result of the selected comparison option is displayed by icons in the
Optional:
If you click on the weighing scales icon of the button
parameterizing mode, the selected parameter is compared:
● Offline mode: By default, the parameters are compared with the factory settings.
● Online mode: By default, the parameters are compared with the offline settings.
Icons in the "Comparison" column
Icon
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
"Comparison" column.
Meaning
The comparison values are equal and error-free.
Offline - Factory setting: The comparison values are different and error-free.
4.4 Comparing parameter settings
"Compare current parameters of this drive object
, then depending on the active
Fundamentals
57