Siemens SINAMICS S120 Getting Started page 93

Procedure
1. Select the motor in the device view and open the Inspector window.
2. In the Inspector window, select the "Motor details > Rating plate values" menu.
In the screen form, the following setting options are displayed:
Figure 5-24
3. To perform the basic parameter assignment for the motor, click the
"Basic parameter assignment" entry.
The function view of the drive axis is opened:
Make the required settings here (see chapter "Basic parameter assignment (Page 115)").
4. In the Inspector window, select the menu "Motor details > Rating plate values" again.
5. Make the settings in the white fields.
The gray fields are refreshed automatically in accordance with your settings.
6. In the Inspector window, select the "Motor details > Motor brake" menu.
The current configuration of the motor holding brake is displayed in the screen form.
Figure 5-25
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
Motor details rating plate values
Motor details motor brake
5.4 Creating a project offline in Startdrive
icon next to the
Commissioning
91