Shortcut Menus And Icons In Startdrive; Function Calls Project View; Project Navigation - Siemens SINAMICS S120 Getting Started

Appendix
A.3 Shortcut menus and icons in Startdrive
A.3

Shortcut menus and icons in Startdrive

A.3.1

Function calls project view

A.3.1.1

Project navigation

Shortcut menu
The shortcut menu of a drive in the project navigator contains the following entries:
Menu item
Open
Parameters
Cut
Copy
Paste
Delete
Rename
Go to topology view
Go to network view
Download to device
Upload from device
(software)
Compile
Go online
Go offline
Online & diagnostics
Browsing a project
Properties
180
Icon (button) in the toolbar
-
-
-
-
-
-
-
-
-
Description
Opens the drive device view.
Opens the parameter view in the working area.
Cuts the selected content and copies it to the clipboard.
Copies the content to the clipboard.
Inserts the clipboard content into the project navigation.
Deletes the selected content from the project navigation.
Permits a designation to be changed.
Opens the topology view for drives that are networked via
PROFINET.
Opens the network view.
Loads the data from the project into the drive (only when online).
Loads the data from the device into the project (only when online).
Compiles existing programs.
Establishes an online connection to the drive.
Disconnects the online connection - the drive goes offline.
Opens the Online & diagnostics editor; if the drive is not online,
Startdrive tries to establish an online connection.
Opens a search mask You can browse for individual information
about the active project using this mask.
Opens the Properties dialog of the drive. There, for example you set
bus parameters.
Getting Started, 12/2018, 6SL3097-5AG30-0BP0