Bico Interconnections; Special Elements In The Screen Forms; A.3.2 Bico Interconnections - Siemens SINAMICS S120 Getting Started

A.3.2

BICO interconnections

The following icons are used for BICO interconnections:
Icon
A.3.3

Special elements in the screen forms

User interface elements are used in the Startdrive screen forms, which deviate from a
standard Windows operation. A brief list with explanation is provided below:
Element
(icon,
button, etc.)
Getting Started, 12/2018, 6SL3097-5AG30-0BP0
Meaning
Allows the BICO interconnection of a binector input. The interconnection
dialog is opened by clicking on the icon.
Allows the BICO interconnection of a binector output. The interconnection
dialog is opened by clicking on the icon.
Allows the BICO interconnection of a connector input. The interconnection
dialog is opened by clicking on the icon.
Allows the BICO interconnection of a connector output. The interconnec-
tion dialog is opened by clicking on the icon.
Clicking on the icon next to the interconnection field allows a list of all of
the active interconnections of the parameter to be opened/displayed.
Shows that invalid BICO wiring exists in the drive screen forms.
Explanation
Changeover switch in position 1. Position 0 can be selected with a mouse click.
Changeover switch in position 0. Position 1 can be selected with a mouse click.
Changeover switch in position x. Position y can be selected with a mouse click.
Changeover switch in position y. Position x can be selected with a mouse click.
Switch for the inversion of signals for digital outputs. In this switch position, the
signal is not inverted.
Switch for the inversion of signals for digital outputs. In this switch position, the
signal is inverted.
A.3 Shortcut menus and icons in Startdrive
Appendix
181